HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 241

26 FABR-1007 Recommended Action In case of severe memory corruption, the system might recover by performing an automatic failover. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING FABR-1007 Message , [FABR-1007], ,, WARNING, , IU free error, caller: . Probable Cause Indicates that a failure occurred when deallocating an information unit. This message is rare and usually indicates a problem with the Fabric OS. Recommended Action In case of severe memory corruption, the system might recover by performing an automatic failover. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING FABR-1008 Message , [FABR-1008], ,, WARNING, , . Probable Cause Indicates that errors occurred during the request domain ID state; the information unit (IU) cannot be allocated or sent. If this message occurs with FABR-1005, the problem is usually transitory. Otherwise, this message is rare and usually indicates a problem with the Fabric OS. The error descriptions are as follows: • FAB RDI: cannot allocate IU • FAB RDI: cannot send IU Recommended Action No action is required if the message appears with the FABR_1005 message. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING FABR-1009 Message Probable Cause , [FABR-1009], ,, WARNING, , . Indicates that errors were reported during the exchange fabric parameter state; cannot allocate domain list due to a faulty exchange fabric parameter (EFP) type. This message is rare and usually indicates a problem with the Fabric OS. Fabric OS Message Reference 171 53-1001338-01