HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 442

45 HIL-1202 If the fan continues to generate this message, replace the fan FRU. Severity WARNING HIL-1202 Message , [HIL-1202], ,, ERROR, , Blower faulted, speed ( RPM) below threshold. Probable Cause Indicates that the specified fan speed (in RPMs) has fallen below the minimum threshold. Recommended Replace the fan field-replaceable unit (FRU). Action Severity ERROR HIL-1203 Message , [HIL-1203], ,, ERROR, , Fan faulted, speed ( RPM) above threshold. Probable Cause Indicates that the specified fan speed (in RPMs) has risen above the maximum threshold. A high speed does not necessarily mean that the fan is faulty. Recommended Action Run the tempShow command to verify that the switch temperatures are within operational ranges. Refer to the hardware reference manual for the temperature range of your switch. Make sure that the area is well-ventilated and that the room temperature is within operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range. Run the fanShow command to monitor the speed of the fan generating this error. If the fan continues to generate this message, replace the fan FRU. Severity ERROR HIL-1204 Message , [HIL-1204], ,, ERROR, , Fan faulted, speed ( RPM) below threshold. Probable Cause Indicates that the specified fan speed (in RPMs) has fallen below the minimum threshold. This message is specific to nonbladed switches and is not applicable to the Brocade 24000 or 48000. Recommended Action For the Brocade 3900 replace the fan FRU. For the Brocade 3016, 3250 and 3850, the entire switch must be replaced because these switches do not have field-replaceable units (FRUs). Severity ERROR 372 Fabric OS Message Reference 53-1001338-01