HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 349

42 FW-1035 Probable Cause Indicates that the temperature of the small form-factor pluggable (SFP) has fallen below the low boundary. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity WARNING FW-1035 Message , [FW-1035], ,, WARNING, , , is above high boundary(High=, Low=). Current value is . Probable Cause Indicates that the temperature of the small form-factor pluggable (SFP) has risen above the high boundary. Frequent fluctuations in temperature might indicate a deteriorating SFP. Recommended Replace the SFP. Action Severity WARNING FW-1036 Message , [FW-1036], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates that the temperature of the small form-factor pluggable (SFP) has changed from a value outside of the acceptable range to a value within the acceptable range. Frequent fluctuations in temperature might indicate a deteriorating SFP. Recommended No action is required. Action Severity INFO FW-1037 Message , [FW-1037], ,, INFO, , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the receive power value of the small form-factor pluggable (SFP) has changed. The receive performance area measures the amount of incoming laser to help you determine if the SFP is in good working condition or not. If the counter often exceeds the threshold, the SFP is deteriorating. Recommended Incoming laser fluctuations usually indicate a deteriorating SFP. If this message occurs repeatedly, Action replace the SFP. Fabric OS Message Reference 279 53-1001338-01