HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 399

42 FW-1339 Recommended Action Run the errShow command to determine the device WWN, switch WWN, and switch port. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and policies. Severity WARNING FW-1339 Message , [FW-1339], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates that the number of device cable connection (DCC) violations has changed from a value outside of the acceptable range to a value within the acceptable range. DCC violations indicate that an unauthorized device tried to join the fabric. The DCC_POLICY allows for the specification of rules for binding device ports (typically host bus adaptor (HBA) ports) to specific switch ports. DCC policies ensure that whenever a device performs a fabric login (FLOGI) request that the world wide name (WWN) specified in the FLOGI is validated to be connected to the authorized port. Enforcement for private loop devices not performing FLOGI is done through the name server. Recommended No action is required. Action Severity INFO FW-1340 Message , [FW-1340], ,, INFO, , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the number of login violations has changed. Login violations indicate that a login failure has been detected. Recommended Action Run the errShow command to determine the IP location of the login attempt. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and policies. Severity INFO FW-1341 Message , [FW-1341], ,, INFO, , , is below low boundary(High=, Low=). Current value is . Probable Cause Indicates that the number of login violations has fallen below the low boundary. Login violations indicate that a login failure has been detected. Recommended No action is required. Action Fabric OS Message Reference 329 53-1001338-01