HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 683

Chapter SYSM System Messages 99 SYSM-1001 Message , [SYSM-1001], , FFDC, CRITICAL, , No memory. Probable Cause Indicates the switch has run out of system memory. Recommended Action Run the memShow command to view the switch memory usage. Restart or power cycle the switch. Run the supportFtp command to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity CRITICAL SYSM-1002 Message , [SYSM-1002], ,, INFO, , , Switch: Probable Cause Indicates a user has executed either the switchShutdown or switchReboot command. All services are brought down for a logical switch. Recommended Action No action is required if the switchShutdown or switchReboot command was executed intentionally. If the switchShutdown command was run, you must run the switchStart command to restart traffic on the logical switch. Severity INFO SYSM-1003 Message , [SYSM-1003], ,, INFO, , , Switch: Probable Cause Indicates the user executed the switchStart or switchReboot command. This indicates that all services are brought back up after a temporary shutdown of that logical switch. Recommended Action No action is required if the switchStart command was executed intentionally. Because reinitializing a switch is a disruptive operation and can stop I/O traffic, you might have to stop and restart the traffic during this process. Severity INFO Fabric OS Message Reference 613 53-1001338-01