HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 621

90 SEC-1326 Recommended Action No action is required unless the switch must remain in the fabric. If the switch must remain in the fabric, add the switch world wide name (WWN) to the SCC policy, then attempt to join the switch with the fabric. Severity ERROR SEC-1326 Message , [SEC-1326], ,, INFO, , Event: fddcfg --fabwideset, Status: success, Info: Fabric wide configuration set to . Probable Cause Indicates the specified event has occurred. Recommended Verify the event was planned. If the event was planned, no action is required. If the event was not Action planned, take appropriate action as defined by your enterprise security policy. Severity INFO SEC-1327 Message , [SEC-1327], ,, WARNING, , Strict policy is conflicting with domain Probable Cause Indicates the policy is conflicting with the domain. Recommended Action No action is required. The domain is denied by disallowing all its E_ports connected to the fabric. If the domain should be allowed to merge with the fabric, then resolve the issue by making the conflicting policies the same. Severity WARNING SEC-1328 Message , [SEC-1328], ,, ERROR, , Attempt to enable secure mode failed. Reason: . Probable Cause Indicates the secModeEnable command failed on the fabric because Authentication Policy is enabled on the switch. Recommended Verify the security event was planned. If the security event was planned, run the authUtil --policy Action passive command to disable the Authentication Policy and retry the secModeEnable command. Severity ERROR Fabric OS Message Reference 551 53-1001338-01