HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 326

36 FICU-1004 Severity WARNING FICU-1004 Message , [FICU-1004], ,, WARNING, , : Failed to set fabric manager server (FMS) mode: conflicting PID Format:, FMS Mode:. Probable Cause Indicates that a process ID (PID) format conflict was encountered. The core PID format is required for fibre connectivity control unit port (FICON-CUP). The pid_format variable displays the PID format currently running on the fabric, and is one of the following: • 0 is VC-encoded PID format • 1 is core PID format • 2 is extended-edge PID format FMS mode displays whether fibre connectivity (FICON) Management Server mode is enabled; a 0 means this mode is enabled and a 1 means this mode is disabled. Recommended Action For FICON Management Server mode (fmsMode) to be enabled, the core PID format must be used in the fabric. Change the PID format to core PID using the configure command and re-enable fmsMode using the ficonCupSet command. Refer to the Fabric OS Administrator's Guide for information on core PID mode and the Fabric OS Command Reference Manual for information on these commands. Severity WARNING FICU-1005 Message , [FICU-1005], ,, ERROR, , Failed to initialize , rc = . Probable Cause Indicates that the initialization of a module within the fibre connectivity control unit port (FICON-CUP) daemon failed. Recommended Download a new firmware version using the firmwareDownload command. Refer to the Fabric OS Action Command Reference Manual for more information on this command. Severity ERROR FICU-1006 Message Probable Cause , [FICU-1006], ,, WARNING, , Control Device Allegiance Reset: (Logical Path: 0x:0x) Indicates that the path with the specified PID and channel image ID lost allegiance to a fibre connectivity control unit port (FICON-CUP) device. 256 Fabric OS Message Reference 53-1001338-01