HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 588

90 SEC-1090 SEC-1090 Message , [SEC-1090], ,, ERROR, , SCC list contains FCS member. Please remove member from the FCS policy first. Probable Cause Indicates there has been a corruption during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Recommended Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. Severity ERROR SEC-1091 Message , [SEC-1091], ,, ERROR, , No policy to remove. Probable Cause Indicates the specified policy member does not exist or the policy itself does not exist. Recommended Verify that the security policy name or member ID is correct. Action Severity ERROR SEC-1092 Message , [SEC-1092], ,, ERROR, , Name not found. Probable Cause Indicates there has been a corruption during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Recommended Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. Severity ERROR SEC-1093 Message , [SEC-1093], ,, ERROR, , New FCS list must have at least one member in common with current FCS list. 518 Fabric OS Message Reference 53-1001338-01