HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 242

26 FABR-1010 Recommended Action The fabric daemon will discard the EFP. The system will recover through the EFP retrial process. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING FABR-1010 Message , [FABR-1010], ,, WARNING, , . Probable Cause Indicates that the errors occurred while cleaning up the request domain ID (RDI). The error description provides further details. This message is rare and usually indicates a problem with the Fabric OS. Recommended If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the Action supportSave command and contact your switch service provider. Severity WARNING FABR-1011 Message , [FABR-1011], , FFDC, ERROR, , . Probable Cause Indicates that the Fabric OS is unable to inform the Fabric OS State Synchronization Management module (FSSME) that the fabric is stable or unstable. This message is rare and usually indicates a problem with the Fabric OS. Recommended If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the Action supportSave command and contact your switch service provider. Severity ERROR FABR-1012 Message , [FABR-1012], ,, WARNING, , : no such type, . Probable Cause Indicates that the fabric is not in the appropriate state for the specified process. This message is rare and usually indicates a problem with the Fabric OS. Recommended Action The fabric daemon will take proper action to recover from the error. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING 172 Fabric OS Message Reference 53-1001338-01