HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 421

42 FW-1500 Recommended Action To maintain full (2X) redundancy and proper monitoring by Fabric Watch, 4 active power supplies should be supplied and the default values associated with the presence of an AP blade should be entered with switchStatusPolicyset command. Severity WARNING FW-1500 Message , [FW-1500], ,, WARNING, , Mail overflow - Alerts being discarded. Probable Cause Indicates that mail alert overflow condition has occurred. Recommended Resolve or disable the mail alert using the fwMailCfg command. Action Severity WARNING FW-1501 Message , [FW-1501], ,, INFO, , Mail overflow cleared - alerts discarded. Probable Cause Indicates that the mail overflow condition has cleared. Recommended No action is required. Action Severity INFO FW-1510 Message , [FW-1510], ,, INFO, , threshold exceeded: Port disabled. Probable Cause Link failures indicates that the specified port is now disabled because the link on this port had multiple link failures that exceed Fabric Watch threshold on the port. Both physical and hardware can cause link failures. Link failures frequently occur due to a loss of synchronization. Link failures also occur due to hardware failures, a defective small form-factor pluggable (SFP) or faulty cable. Protocol errors indicates CRC sum disparity. Occasionally, these errors occur due to software glitches. Persistent errors occur due to hardware problems. Recommended Check for concurrent loss of synchronization errors. Check the SFP and the cable. Then enable the Action port using the portEnable command. Severity INFO Fabric OS Message Reference 351 53-1001338-01