HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 672

96 SULB-1025 SULB-1025 Message , [SULB-1025], ,, WARNING, , The blade in slot will reboot with the new firmware. Probable Cause Indicates new firmware has been downloaded to the specified AP blade and that the AP blade will reboot to activate it. Recommended Wait for the blade to reboot. Action Severity WARNING SULB-1026 Message , [SULB-1026], , AUDIT, WARNING, , Firmware commit operation started on the blade in slot . Probable Cause Indicates the firmwareCommit has started on the specified blade. The operation may be a normal part of firmwareDownload, or it may have started to repair the secondary partition of the blade if the secondary partition is corrupted. Recommended No action is required. Action Severity WARNING SULB-1030 Message , [SULB-1030], AUDIT, WARNING, , The switch has rebooted during relocating the internal firmware image. Probable Cause Indicates there may be an error caused by an unexpected disruption of the firmwareDownload command, for example, by powering the switch off and on in the middle of a firmwareDownload. The error may also be caused by persistent storage hardware failure or by a software error. Recommended Action The firmwareDownload command will continue after the switch has rebooted. Run the firmwareDownloadStatus command to monitor progress. If the problem persists, contact your switch service provider. Severity WARNING SULB-1031 Message Probable Cause , [SULB-1031], , AUDIT, WARNING, , The switch is relocating an internal firmware image. Indicates the switch has rebooted with the new firmware and is relocating the AP firmware. 602 Fabric OS Message Reference 53-1001338-01