HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 153

Chapter C2 System Messages 11 C2-1001 Message , [C2-1001], ,, ERROR, , Port port faulted due to SFP validation failure. Please check if the SFP is valid for the configuration. Probable Cause Indicates a deteriorated SFP, an incompatible SFP pair, or a faulty cable between the peer ports. Recommended Verify that you are using compatible SFPs on the peer ports. Verify that the SFPs have not Action deteriorated and the Fibre Channel cable is not faulty. Replace SFPs or cable if necessary. Severity ERROR C2-1002 Message , [C2-1002], ,, ERROR, , Port chip faulted due to an internal error. Probable Cause Internal error. All the ports on the blade or switch will be disrupted. Recommended For a bladed system, perform slotpoweroff and slotpoweron operations on the blade to recover the Action system. For a non-bladed system, perform fastboot on the switch to recover the system. Severity ERROR C2-1004 Message , [C2-1004], ,, ERROR, , ,: Invalid DMA ch pointer, chan:, good_addr: bad_addr:. Probable Cause Indicates an internal error in the Application-Specific Integrated Circuit (ASIC) hardware that may degrade data traffic. Recommended Whenever this error is observed, restart the system at the next maintenance window. If the problem Action persists, replace the blade. Severity ERROR Fabric OS Message Reference 83 53-1001338-01