HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 570

90 SEC-1003 SEC-1003 Message , [SEC-1003], ,, WARNING, , Fail to download security data to domain after retries Probable Cause Indicates the specified domain has failed to download security data after the specified number of attempts, and that the failed switch encountered an error accepting the database download. The primary switch will segment the failed switch after 30 tries. Recommended Action Reset the version stamp on the switch to '0' using the secVersionReset command and then rejoin the switch to the fabric. If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING SEC-1005 Message , [SEC-1005], ,, INFO, , Primary FCS receives data request from domain Probable Cause Indicates the primary fabric configuration server (FCS) received a data request from the specified domain. For example, if the switch fails to update the database or is attacked (data injection), a message is generated to the primary FCS to try to correct and resync with the rest of the switches in the fabric. Recommended Action Use the secFabricShow command to check whether any of the switches in the fabric encountered an error. If one or more switches is not in the Ready state, and you have reason to believe that the error is the result of a possible security breach, take appropriate action as defined by your enterprise security policy. Severity INFO SEC-1006 Message , [SEC-1006], ,, WARNING, , Security statistics error: Failed to reset due to invalid . Probable Cause Indicates that invalid data has been received for any statistic-related command for security (secStatsShow or secStatsReset). The counter is updated automatically when a security violation occurs. This message might also occur if the updating counter fails. Recommended Action If the message is the result of a user command, retry the statistic command. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING 500 Fabric OS Message Reference 53-1001338-01