HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 443

45 HIL-1206 HIL-1206 Message , [HIL-1206], ,, ERROR, , Fan sensor , speed ( RPM) below threshold. Probable Cause Indicates that the specified fan speed (in RPMs) has fallen below the minimum threshold. This problem can quickly cause the switch to overheat. This message is specific to nonbladed switches and is not applicable to the Brocade 24000 or 48000. Recommended For the Brocade 4100, 4900, 7500, and AP7600, replace the fan field-replaceable unit (FRU). Action Severity ERROR HIL-1207 Message , [HIL-1207], ,, ERROR, , Fan is faulty. Probable Cause Indicates that the fan is faulty. Recommended Action Use the tempShow command to verify that the switch temperatures are within operational ranges. Refer to the hardware reference manual for the temperature range of your switch. Make sure that the area is well-ventilated and that the room temperature is within operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range. Use the fanShow command to monitor the status of the fan generating this error. If the fan continues to generate this message, replace the switch because the fan is not field-replaceable. Severity ERROR HIL-1208 Message , [HIL-1208], ,, INFO, , Fan is not faulty. Probable Cause Indicates that the fan is not faulty. Recommended Action This can only occur on switches with non-removable fans. It follows a previous indication of faultiness. If the fan continues to generate this message, it indicates oscillation between faulty and non-faulty behavior. Replace the switch because the fan is not field-replaceable. Severity INFO Fabric OS Message Reference 373 53-1001338-01