HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 623

90 SEC-1333 Recommended Remove either the FCS from the fabric-wide policy, or remove 5.3 and 5.2 switches from the fabric, Action or set the fabric-wide mode for FCS as Strict. Severity ERROR SEC-1333 Message , [SEC-1333], ,, INFO, , command failed. There are VF enabled switches in fabric. db(s) distribution is blocked. Probable Cause Indicates an attempt to distribute PWD or IPFILTER databases from the fabric to a switch that is VF-enabled. Recommended If the databases need to be distributed, disable VF on all the switches that have VF enabled. If the Action databases do not need to be distributed, no action is required. Severity ERROR SEC-3005 Message , [SEC-3005], , AUDIT, INFO, , Event: , Status: success, Info: Added member(s) to policy . Probable Cause Indicates new members have been added to a security policy. If you use a wildcard (for example, an asterisk) in adding members to a policy, the audit report displays the wildcard in the event info field. Recommended Action Verify the addition of members to the policy was planned. If the addition of members was planned, no action is required. If the addition of members was not planned, take appropriate action as defined by your enterprise security policy. Severity INFO SEC-3035 Message , [SEC-3035], , AUDIT, INFO, , Event: ipfilter, Status: success, Info: ipfilter policy(ies) saved. Probable Cause Indicates that the specified IP filter policy has been saved. Recommended Action Verify that the security event was planned. If the security event was planned, no action is required. If the security event was not planned, take appropriate action as defined by your enterprise security policy. Severity INFO Fabric OS Message Reference 553 53-1001338-01