HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 694

10 TS-1006 TS-1006 Message , [TS-1006], ,, INFO, , . Probable Cause Indicates a time service event is occurring or has failed. The message might be one of the following: • Init failed. Time Service exiting Probable Cause: Initialization error, Time Server exits. • Synchronizing time of day clock Probable Cause: Usually logged during temporary operational issues when the clock goes out of synchronization: For example, when a time update packet is missed due to fabric reconfiguration or role change of the principal or primary fabric configuration server (FCS) switch. If the message does not recur, it should be ignored. • Validating time update Probable Cause: Usually logged during temporary operational issues when a time update packet cannot be validated in a secure fabric. For example, during fabric reconfiguration or role change of the primary FCS switch. If the message does not recur, it should be ignored. Recommended No action is required. Action Severity INFO TS-1007 Message , [TS-1007], ,, WARNING, , . Probable Cause Indicates a switch is trying to set the tsclockserver, which is not the primary fabric configuration server (FCS) across the fabric. A consistent FCS policy must be implemented across the fabric. Recommended Verify the FCS policy is consistent across the fabriclog_ts.xml. Action Severity WARNING TS-1008 Message , [TS-1008], ,, WARNING, , Clock Server used instead of . Probable Cause Indicates there is a change in the source of fabric time synchronization distributed from the principal or primary fabric configuration server (FCS) switch. Another clock server in the list of clock servers configured is being used. This happens when the network time protocol (NTP) query to the current active external clock server fails. Recommended No action is required. Action Severity WARNING 624 Fabric OS Message Reference 53-1001338-01