HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 336

39 FSPF-1005 FSPF-1005 Message , [FSPF-1005], ,, ERROR, , Wrong Section Id , should be , input port = Probable Cause Indicates that an incorrect section ID was reported from the specified input port. The section ID is used to identify a set of switches that share an identical topology database. The section ID is implemented inside the protocol. The error message itself will indicate the mismatched section ID. It should be set to 0 for a non-hierarchical fabric. Brocade switches support only section ID 0. Recommended Action Use a frame analyzer to verify that the reported section ID is 0. Any connected switch from another manufacturer with a section ID other than 0 is incompatible in a fabric of SilkWorm switches. Disconnect the offending switch. Severity ERROR FSPF-1006 Message , [FSPF-1006], ,, ERROR, , FSPF Version not supported, input port = Probable Cause Indicates that the FSPF version is not supported on the specified input port. Recommended Update the FSPF version by running the firmwareDownload command to update the firmware to the Action latest version. All current versions of the Fabric OS support FSPF version 2. Severity ERROR FSPF-1007 Message , [FSPF-1007], ,, ERROR, , ICL triangular topology is broken between the neighboring domains: and . Please fix it ASAP. Probable Cause Indicates that the ICL triangular topology is broken and becomes linear. It may cause the frame drop or performance slowdown. Recommended Connect the two domains using ICL or regular ISL to form a triangular topology. Action Severity ERROR FSPF-1008 Message Probable Cause , [FSPF-1008], ,, INFO, , ICL triangular topology is formed among the domains: (self), and . Indicates that the ICL triangular topology is formed. 266 Fabric OS Message Reference 53-1001338-01