HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 366

42 FW-1167 Probable Cause Indicates that the number of synchronization losses that the port experiences has risen above the high boundary. Loss-of-synchronization errors frequently occur due to a faulty small form-factor pluggable (SFP) or cable. Signal losses often create synchronization losses. Recommended Action Check both ends of your cable connection. Verify that the cable and small form-factor pluggables (SFPs) are not faulty. If you continue to experience loss-of-synchronization errors, troubleshoot your host bus adaptor (HBA) and contact your switch service provider. Severity WARNING FW-1167 Message , [FW-1167], ,, INFO, , , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates that the number of synchronization losses that the port experiences has changed from a value outside of the acceptable range to a value within the acceptable range. Loss of synchronization errors frequently occur due to a faulty small form-factor pluggable (SFP) or cable. Signal losses often create synchronization losses. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1168 Message , [FW-1168], ,, INFO, , , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the number of signal losses that the port experiences has changed. Loss of signal generally indicates a physical problem. Recommended Check both ends of your cable connection. Verify that the cable and small form-factor pluggables Action (SFPs) are not faulty. Severity INFO FW-1169 Message Probable Cause , [FW-1169], ,, INFO, , , , is below low boundary(High=, Low=). Current value is . Indicates that the number of signal losses that the port experiences has fallen below the low boundary. Loss of signal generally indicates a physical problem. 296 Fabric OS Message Reference 53-1001338-01