HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 97

AG-1008 2 Recommended Check the connectivity between the Access Gateway N_Port and the fabric switch port. Action Severity WARNING AG-1008 Message , [AG-1008], ,, WARNING, , Invalid port login (PLOGI) response from the fabric on the N_Port . Probable Cause Indicates the fabric switch management server did not accept the N_Port Login (PLOGI) request sent by the Access Gateway. Recommended Action Check the configuration of the fabric switch connected to the Access Gateway. If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING AG-1009 Message , [AG-1009], ,, WARNING, , Sending FLOGI failed on N_Port . Probable Cause Indicates there was a failure sending a Fabric Login (FLOGI) request from the Access Gateway to the fabric switch. Recommended Action Please check the configuration of the fabric switch connected to the Access Gateway. If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING AG-1010 Message , [AG-1010], ,, WARNING, , Sending PLOGI failed on N_Port . Probable Cause Indicates there was a failure sending an N_Port Login (PLOGI) request from the Access Gateway to the fabric switch. Recommended Action Check the configuration of the fabric switch connected to the Access Gateway. If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING Fabric OS Message Reference 27 53-1001338-01