HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 613

90 SEC-1250 Severity INFO SEC-1250 Message , [SEC-1250], ,, WARNING, , DCC enforcement API failed: err=, key= Probable Cause Indicates an internal error caused the DCC policy enforcement to fail. Recommended Action Retry the failed security command. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING SEC-1251 Message , [SEC-1251], ,, ERROR, , Policy to binary conversion error: . Probable Cause Indicates the security database conversion failed because of invalid values. The reason is specified in the text message variable and a faulty value is printed in the value variable. Recommended Action Retry the failed security command. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR SEC-1253 Message , [SEC-1253], ,, ERROR, , Bad DCC interface state during , state=. Probable Cause Indicates an internal error has caused the device connection control (DCC) policy update to fail in the provision, commit, or cancel phases. Recommended Action Retry the failed security command. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR SEC-1300 Message , [SEC-1300], ,, INFO, , This switch is in VcEncode mode. Security is not supported. Fabric OS Message Reference 543 53-1001338-01