HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 715

11 ZONE-1027 Severity INFO ZONE-1027 Message , [ZONE-1027], ,, INFO, , Zoning transaction aborted . . Probable Cause Indicates the zoning transaction was aborted due to a variety of potential errors. The error reason variable can be one of the following: • Zone Merge Received: The fabric is in the process of merging two zone databases. • Zone Config update Received: The fabric is in the process of updating the zone database. • Bad Zone Config: The new config is not viable. • Zoning Operation failed: A zoning operation failed. • Shell exited: The command shell has exited. • Unknown: An error was received for an unknown reason. • User Command: A user aborted the current zoning transaction. • Switch Shutting Down: The switch is currently shutting down. Recommended Action Many of the causes of this error message are transitory, for example, because two administrators are working with the zoning database concurrently. If you receive this error, wait for few minutes and try again. Ensure that no user is currently modifying the zone database. Severity INFO ZONE-1028 Message , [ZONE-1028], ,, WARNING, , Commit zone DB larger than supported - greater than . Probable Cause Indicates the zone database size is greater than the limit allowed by the fabric. The limit of the zone database size depends on the lowest level switch in the fabric. Older switches have less memory and force a smaller zone database for the entire fabric. Recommended Action Edit the zone database to keep it within the allowable limit for the specific switches in your fabric. Refer to the Fabric OS Administrator's Guide for information on the zone database sizes supported for each switch. Severity WARNING ZONE-1029 Message Probable Cause , [ZONE-1029], ,, WARNING, , Restoring zone cfg from flash failed - bad config saved to []. Indicates the zone configuration restored from the flash was faulty. Fabric OS Message Reference 645 53-1001338-01