HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 129

BL System Messages Chapter 7 BL-1000 Message , [BL-1000], ,, INFO, , Initializing ports... Probable Cause Indicates that the switch has started initializing the ports. Recommended No action is required. Action Severity INFO BL-1001 Message , [BL-1001], ,, INFO, , Port initialization completed. Probable Cause Indicates that the switch has completed initializing the ports. Recommended No action is required. Action Severity INFO BL-1002 Message , [BL-1002], , FFDC, CRITICAL, , Init Failed: slot DISABLED because internal ports were not ONLINE, . Probable Cause Indicates that the blade initiation failed because one or more of the internal ports were not online. The blade is faulted. Recommended Action Make sure that the blade is seated correctly. If the blade is seated correctly, restart or power cycle the blade. Run the systemVerification command to verify that the blade does not have hardware problems. To run this command root access is required. To run this command root access is required. Refer to the Fabric OS Command Reference Manual for more information on this command. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. Additional blade fault messages precede and follow this error, providing more information. See other error messages for recommended action. If the message persists, replace the blade. Fabric OS Message Reference 59 53-1001338-01