HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 768

125 SULB-1004 SULB-1004 Message AUDIT, , [SULB-1004], INFO, FIRMWARE, , , , Firmwarecommit has completed. Probable Cause Indicates the FirmwareCommit command is executed. Recommended No action is required. Run the firmwareDownloadStatus command for more information. Action Severity INFO SULB-1009 Message Probable Cause AUDIT, , [SULB-1009], INFO, FIRMWARE, , , , Firmwaredownload command failed. status: 0x, error: 0x. Indicates the firmwareDownload command failed. The additional status code and error code provide debugging information. Table lists firmwareDownload status messages and status codes. Some of them will not show up in this RASLOG message. They are listed for the sake of completeness. TABLE 9 Status Messages and Status Codes Status Message Status Code "firmwareDownload sanity check failed." "Sanity check failed because system is non-redundant." "Sanity check failed because firmwareDownload is already in progress." "Sanity check failed because FABRIC OS is disabled on Active CP." "Sanity check failed because HAMD is disabled on Active CP." "Sanity check failed because firmwareDownload is already in progress." "Sanity check failed because FABRIC OS is disabled on Standby CP." "Sanity check failed because HAMD is disabled on Standby CP." "firmwareDownload failed on Standby CP." "firmwareDownload failed on Standby CP." "firmwareDownload failed on Standby CP." "firmwareCommit failed on Standby CP." "firmwareDownload failed." "firmwareDownload failed due to IPC error." "Unable to check the firmware version on Standby CP due to IPC error." "firmwareDownload failed due to IPC error." "firmwareDownload failed due to IPC error." "Standby CP failed to reboot due to IPC error." 0x30 0x31 0x32 0x33 0x34 0x35 0x36 0x37 0x40 0x41 0x42 0x43 0x44 0x50 0x51 0x52 0x53 0x54 698 Fabric OS Message Reference 53-1001338-01