HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 226

22 EM-1051 EM-1051 Message , [EM-1051], ,, INFO, , : Inconsistency detected, FRU re-initialized. Probable Cause Indicates that an inconsistent state was found in the field-replaceable unit (FRU). This occurs if the state of the FRU was changing during a failover. The FRU is reinitialized and traffic might have been disrupted. Recommended No action is required. Action Severity INFO EM-1057 Message , [EM-1057], ,, WARNING, , Blade: is getting reset:. Probable Cause Indicates the blade is being automatically reset because of known resetable transient errors such as an application-specific integrated circuit (ASIC) parity error. Recommended Action No action is required if the switch does not reach the reset threshold for the switch or blade. If the reset threshold is reached on the switch or blade, the switch or blade will be faulted and should be replaced. Severity WARNING EM-1058 Message , [EM-1058], ,, WARNING, , Switch gets reset: Probable Cause Indicates the switch is being automatically reset because of a known resetable transient problem such as an application-specific integrated circuit (ASIC) parity error. Recommended Action No action is required if the switch does not reach the reset threshold for the switch or blade. If the reset threshold is reached on the switch or blade, the switch or blade will be faulted and should be replaced. Severity WARNING EM-1059 Message Probable Cause , [EM-1059], , FFDC, ERROR, , with id cannot be found in the fru description xml file. Indicates that a blade inserted in the specified slot or the switch (for nonbladed switches) is not compatible with the switch configuration software. The system may not be usable. 156 Fabric OS Message Reference 53-1001338-01