HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 350

42 FW-1038 Severity INFO FW-1038 Message , [FW-1038], ,, WARNING, , , is below low boundary(High=, Low=). Current value is . Probable Cause Indicates that the receive power value of the small form-factor pluggable (SFP) has fallen below the low boundary. The receive performance area measures the amount of incoming laser to help you determine if the SFP is in good working condition or not. If the counter often exceeds the threshold, the SFP is deteriorating. Recommended Verify that your optical components are clean and function properly. Replace deteriorating cables or Action SFPs. Check for damage from heat or age. Severity WARNING FW-1039 Message , [FW-1039], ,, WARNING, , , is above high boundary(High=, Low=). Current value is . Probable Cause Indicates that the receive power value of the small form-factor pluggable (SFP) has risen above the high boundary. The receive performance area measures the amount of incoming laser to help you determine if the SFP is in good working condition or not. If the counter often exceeds the threshold, the SFP is deteriorating. Recommended Replace the SFP before it deteriorates. Action Severity WARNING FW-1040 Message , [FW-1040], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates that the receive power value of the small form-factor pluggable (SFP) has changed from a value outside of the acceptable range to a value within the acceptable range. The receive performance area measures the amount of incoming laser to help you determine if the SFP is in good working condition or not. If the counter often exceeds the threshold, the SFP is deteriorating. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO 280 Fabric OS Message Reference 53-1001338-01