HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 256

27 FABS-1012 Recommended Action Reboot or power-cycle the CP or system. If the message persists, run the firmwareDownload command to update the firmware. Severity ERROR FABS-1012 Message , [FABS-1012], ,, ERROR, , []:FRU state transition failed. Current state 0x Requested state 0x err 0x Probable Cause A FRU could not be transitioned to the requested state. This is usually an internal Fabric OS problem. Recommended Action Reboot or power-cycle the CP or system. If the message persists, run the firmwareDownload command to update the firmware. Severity ERROR FABS-1013 Message , [FABS-1013], ,, ERROR, , []:Unknown blade type 0x Probable Cause Indicates an unrecognized type of blade has been discovered in the system. This may be caused by an incorrect FRU header, inability to read the FRU header, or the blade may not be supported by this platform or Fabric OS version. Recommended Action Verify that the blade is valid for use in this system and this version of Fabric OS. Try reseating the blade. If this is a valid blade and reseating does not fix the problem, then replace the blade. Severity ERROR FABS-1014 Message , [FABS-1014], ,, ERROR, , []:Unknown FRU type 0x Probable Cause Indicates an unrecognized type of FRU has been discovered in the system. This may be caused by an incorrect FRU header, inability to read the FRU header, or the FRU may not be supported by this platform or Fabric OS version. Recommended Action Verify that the FRU is valid for use in this system and this version of Fabric OS. Try reseating the FRU. If this is a valid FRU and reseating does not help, then replace the FRU. 186 Fabric OS Message Reference 53-1001338-01