HP StorageWorks 1606 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01 - Page 247

26 FABR-1030 • VC_RDY mode: Virtual-channel flow control mode. This is a proprietary protocol. • R_RDY mode: Receiver-ready flow control mode. This is the Fibre Channel standard protocol, that uses R_RDY primitive for flow control. • DUAL_CR mode: Dual-credit flow control mode. In both of the previous modes, the buffer credits are fixed, based on the port configuration information. In this mode, the buffer credits are negotiated as part of exchange link parameter (ELP) exchange. This mode also uses the R_RDY primitive for flow control. Recommended No action is required. Action Severity INFO FABR-1030 Message , [FABR-1030], ,, INFO, , fabric: Domain (was ). Probable Cause Indicates that the domain ID has changed as specified. Recommended No action is required. Action Severity INFO FABR-1031 Message , [FABR-1031], , FFDC, WARNING, , Maximum number of retries sending ILS from port exceeded. Probable Cause Indicates the fabric exhausted the maximum number of retries sending internal link service (ILS) to the iswitchd demon on the specified E_Port. Recommended Run the top command to see if iswitchd is extremely busy or if another process is using excessive Action CPU resources. Severity WARNING FABR-1032 Message , [FABR-1032], , WARNING, , Remote switch with domain ID and switchname running an unsupported FOS version v2.x has joined the fabric. Probable Cause Indicates that a switch with an unsupported Fabric OS version 2.x has joined the fabric. Recommended Remove the switch with the unsupported Fabric OS version 2.x from the fabric. Action Fabric OS Message Reference 177 53-1001338-01