HP OmniBook 500 hp omnibook 500 - Corporate Evaluator's Guide - Page 139
To disable automatic CD-ROM detection, To install the Intel® SpeedStep™ Technology Applet
View all HP OmniBook 500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
Using Windows NT 4.0 Installing Windows NT 4.0 Note The TDI source files should be installed from a local hard drive. The TCAPTDI.INF file must remain in the C:\HP\DRIVERS\NT4\LAN subdirectory in order for uninstall to work. To disable automatic CD-ROM detection Windows NT 4.0 will automatically detect and respond when you insert a CD-ROM. However, this prevents the notebook from automatically turning off after a period of inactivity if a CD-ROM is present. To disable this feature: 1. From Start Menu, click Run. 2. Enter REGEDT32 then click OK. 3. Select the HKEY_LOCAL_MACHINE window and go to SYSTEM\CURRENTCONTROLSET\SERVICES\CDROM. 4. Double-click on Autorun. 5. Enter 0 and click OK. 6. Close the Registry Editor and restart Windows NT 4.0. To install the Intel® SpeedStep™ Technology Applet If you've installed a retail version of Windows NT4, you'll need to install the Intel® SpeedStep™ technology Applet if you have a dual-speed Pentium III processor. The Intel SpeedStep files can be downloaded from http://www.hp.com/omnibook under \HP\DRIVERS\NT4\SPEEDSTP. 1. Double-click SETUP.EXE in the SpeedStep directory. 2. When prompted, click Next. 3. Click Finish to reboot your computer. Upon successful installation, a SpeedStep icon appears on the bottom right corner of the taskbar. Corporate Evaluator's Guide 139