HP OmniBook 500 hp omnibook 500 - Corporate Evaluator's Guide - Page 87
Configuring and Expanding Your Computer, Corporate Evaluator's Guide, Main Menu
View all HP OmniBook 500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Configuring and Expanding Your Computer Using the BIOS Setup Utility Setting BIOS Revision Exp. Base BIOS Revision* System Time System Date LCD Time format* LCD Date format* Floppy Drive Main Menu Description Shows the current version of the computer's BIOS (version FA.M1.00 at initial release). Shows the current version of the expansion base's BIOS (version FP.M1.00 at initial release). Sets the time using 24-hour format. Value set takes effect immediately. Sets the date using mm/dd/yy format. Value set takes effect immediately. Sets the format for displaying time on the expansion base's status panel. Sets the format for displaying the date on the expansion base's status panel. Sets the floppy drive type. Internal Hard Disk Sets the hard disk drive type and various parameters. Quiet Boot When enabled, hides summary of power-on self-test and messages during boot. Video Display Device Sets whether the computer automatically switches to an external monitor if one is detected. Video Expansion When enabled, the video image covers the entire display in lower resolution modes (SVGA or VGA). When disabled, the video image is centered in the display. Television Type Controls the signal format (NTSC or PAL) output by the S-video port when Windows is not running. System Memory Shows the system memory size. Extended Memory Shows the extended memory size (equal to total memory minus 1 MB). CPU Serial Number For a processor with a serial number, makes the processor serial number available to software. * Available only when docked. Default Detected automatically. Detected automatically. 12 Hours mm/dd/yy Detected automatically. Detected automatically. Enabled Auto Disabled NTSC 640 KB Detected automatically. Disabled Corporate Evaluator's Guide 87