HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 110

2 cfgDisable cfgDisable Disables a zone configuration. Synopsis cfgdisable Description Use this command to disable the current zone configuration. The fabric returns to non-zoning mode, in which all devices see each other. This command ends and commits the current zoning transaction buffer to both volatile and nonvolatile memory. If a transaction is open on a different switch in the fabric when this command is run, the transaction on the other switch is automatically aborted. A message displays on the other switches to indicate that the transaction was aborted. If the default zone access mode is "No Access", then this command becomes cfgEnable "d_efault_Cfg". Refer to defZone help for zone access configuration. Notes The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. When an FCS policy is enabled, this command can be issued only from the primary FCS switch. Operands none Examples To disable the current zone configuration: switch:admin> cfgdisable You are about to disable zoning configuration. This action will disable any previous zoning configuration enabled. Do you want to disable zoning configuration? (yes, y, no, n): [no] y See Also cfgClear, cfgEnable, cfgSave 80 Fabric OS Command Reference 53-1001337-01