HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 479

licenseAdd 2 licenseAdd Synopsis Adds a license key to a switch. licenseadd license Description Use this command to add a license key to a switch. Some features of the switch and the fabric to which it is connected are optional, licensed products. Without a valid license installed for such products, their services are not available. A license key is a string of any length consisting of upper- and lowercase letters and numbers. License keys are case-sensitive. The license must be entered exactly as issued. The system may accept an incorrectly entered license, but the licensed products will not function. After entering the license, use the licenseShow command to validate the product associated with the license. If no licensed products are shown, the license is invalid. After you enter a license, the licensed product is generally available immediately without requiring a system reboot. The following exceptions apply: • When adding a fabric license to a switch that lacks a fabric license, you must reboot the switch to activate the license. • When adding a trunking license is added to the switch, you must refresh the trunk ports to activate the trunking license. Depending on your system, use portDisable/portEnable, switchDisable/switchEnable or chassisDisable/chassisEnable to refresh the trunk ports. Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. Operands This command has the following operand: license Specifies the license key to be installed. This operand is required. Examples To add a license key to the switch: switch:admin> licenseadd DXXtN3LmRSMWCSW3XmfSBPfrWKLZ3HMTN73rP9GANJMA adding license-key [DXXtN3LmRSMWCSW3XmfSBPfrWKLZ3HMTN73rP9GANJMA] See Also licesnseHelp, licenseRemove, licenseShow Fabric OS Command Reference 449 53-1001337-01