HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 420

2 iodSet The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands This command has the following operands: --enable -lossLessDls Enables the lossless DLS feature. Frame loss is reduced while the path is rerouted. If IOD is set on the switch, this command adds lossless DLS to the existing IOD legacy mode. If IOD is not set on the switch, this command enables both, IOD and the lossless DLS feature. --disable -lossLessDls Disables the previously enabled feature. Execution of this command is equivalent to the legacy iodSet command. In-order-delivery is enforced but not without frame loss. IOD (legacy mode) is still set after lossless DLS is disabled. Use iodReset to disable IOD completely. --show Displays the IOD setting on the switch. This command displays the status of both, legacy IOD setting and IOD enhanced with lossless DLS. --help Displays the command usage. Examples To enable IOD with lossless DLS on a switch, on which IOD is not set: switch:admin> iodset --show IOD is not set switch:admin> iodset --enable -losslessDLS 2008/10/03-05:05:37, [UCST-1026], 9936, FID 128, INFO, 5100_sw, LossLess-DLS option has been enabled switch:admin> iodset --show IOD is set with LossLess DLS enabled To disable the lossless DLS feature and display the status: switch:admin> iodset --disable -lossLessDLS 2008/10/03-05:05:57, [UCST-1027], 9937, FID 128, INFO, 5100_sw, LossLess-DLS option has been disabled switch:admin>iodset --show IOD is set To remove the legacy IOD setting and display the status: switch:admin>iodreset switch:admin>iodset --show IOD is not set See Also iodShow, iodReset 390 Fabric OS Command Reference 53-1001337-01