HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 935
usbStorage, device until it is enabled again.
View all HP StorageWorks 1606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 935 highlights
usbStorage 2 usbStorage Manages data files on an attached USB storage device. Synopsis usbstorage [-e | --enable] usbstorage [-d | --disable] usbstorage [-l | --list] usbstorage [-r | --remove area target] usbstorage [-h | --help] Description Use this command to control a USB device attached to the Active CP. When the USB device is enabled, other applications, such as supportSave, firmwareDownload, firmwareKeyupdate, or configDownload/cfgUpload can conveniently store and retrieve data from the attached storage device. Refer to the help pages for these commands for specific information on how the USB device is accessed by each application. Notes The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command is available only on the Active CP. Operands All operands are exclusive. Only one operand can be specified, followed by suboperands if applicable. -e | --enable Enables the USB device. The USB device must be enabled before the list and remove functions are available. -d |--disable Disables an enabled USB device. This command prevents access to the device until it is enabled again. -r |--remove area target Removes a target in a specified application storage area. Valid areas are: firmware, support, config, or firmwarekey. A specified area must be followed by a target. Any existing file in a given application directory can be specified as a target. This command removes all data associated with the specified target. -l |--list Lists the content of the USB device up to two levels down from the root directory. -h |--help Displays the command usage. Examples To enable an attached USB device: switch:admin> usbstorage -e USB storage enabled To list the contents of the attached USB device: switch:admin> usbstorage -l firmwarekey\ 0B support\ 106MB support1034\ 105MB config\ 0B 2007 Aug 15 15:13 2007 Aug 24 05:36 2007 Aug 23 06:11 2007 Aug 15 15:13 Fabric OS Command Reference 905 53-1001337-01