HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 488

2 licenseSlotCfg licenseSlotCfg Synopsis Configures and displays slot-based licensed features. licenseslotcfg --add feature slot licenseslotcfg --remove feature slot licenseslotcfg --show licenseslotcfg --help Description Use this command to configure and manage licenses for the Brocade FX8-24 extension blade on the slot where the blade is installed. Slot-based licenses allow you to select the slots the license will enable up to the purchased capacity and thereby increase existing capacity without disrupting the slots for which licensed features are already enabled. There is a separate slot-based license key for each licensed feature supported on the blade. For example, the Brocade FX8-24 supports slot-based license keys for each of the following features: • 10 GbE license - Enables the two 10GbE ports on the Brocade FX8-24. • Advanced Extension license - Enables FCIP Trunking and Adaptive Rate Limiting. • Advanced FICON Acceleration license - Accelerates FICON tape read and write and IBM Global Mirror data replication operations over distance. A license key with the specified capacity must be installed with the licenseAdd command before you can enable the feature on a specified slot with the licenseSlotCfg command. Refer to the Fabric OS Administrator's Guide for more information. Note Operands The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. In Fabric OS v6.3.0, slot-based licensing is available only on the Brocade FX8-24 extension blade. All other blades continue to use the chassis-based licensing model as before. feature slot --add --remove --show Specifies the licensed feature to be added at the specified slot. The feature is specified as a tag from the following set of licenses: FTR_AE Advanced Extension license FTR_AFA Advanced FICON Acceleration license FTR_10G 10 Gigabit Ethernet license Specifies the slot number for the Brocade FX8-24 extension blade. This number corresponds to the physical blade slot number on the chassis (1-4, 9-12 on the Brocade DCX; 1-2, 7-8 on the Brocade DCX-4S). Adds a slot-based license to the specified slot. Removes a slot-based license from the specified slot. This operation frees up the license to be assigned to another slot. You must disable the applications that use the license on this slot before you can deactivate the license. Displays all slot-based licenses in the chassis. 458 Fabric OS Command Reference 53-1001337-01