HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 610
Enable or disable Tape Pipelining., In the Fabric OS v6.3.0 release
View all HP StorageWorks 1606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 610 highlights
2 portCfg To create an IP interface using IPv6 with a prefix: switch:admin> portcfg ipif 8/ge0 create 2000::800:3333:1234/64 1500 Operation Succeeded To delete an IP interface: switch:admin> portcfg ipif 4/ge0 delete 192.168.100.50 Operation Succeeded To create a static IP route with a metric of 2 using an IPv4 address: switch:admin> portcfg iproute ge0 create 172.16.0.0 255.255.0.0 192.168.255.25 2 Operation Succeeded To create a static IP route using IPv6: switch:admin> portcfg iproute 8/ge0 create 3000:4444:800::3456/64 1080::8:800:200C:1234 To delete a static IP route using an IPv4 address: switch:admin> portcfg iproute ge0 delete 172.16.123.231 Operation Succeeded Function Synopsis Commands supported only on the Brocade 7800 and the Brocade FX8-24 platforms portcfg action [slot/]ve_port options arguments Description Use this command to configure FCIP tunnels and FCIP circuits on the 1/10 GbE ports on the Brocade 7800 and FX8-24 platforms only. The FCIP tunnels on the local and remote GbE ports act as Virtual E_Ports (VE_Ports) connecting the local and remote fabrics. The following operations can be performed with this command: • portcfg fciptunnel - Create, modify, and delete Fibre Channel over IP (FCIP) tunnels. - Configure a tunnel with the FastWrite feature. - Enable or disable Tape Pipelining. - Configure the compression options. - Set the committed rate for the default circuit - Configure a tunnel for FICON emulation • portcfg fcipcircuit - Create, modify, and delete FCIP circuits. Note In the Fabric OS v6.3.0 release, you may configure up to 20 FCIP tunnels on the Brocade FX8-24 and up to 8 tunnels on the Brocade 7800. In the Fabric OS v6.3.0 release, IPv6 addresses are not supported on the Brocade 7800 and FX8-24 platforms. Operands This command has the following operands: slot For bladed systems only, specifies the slot number of the port to be configured, followed by a slash (/). ve_port Specifies the number of the VE_Port associated with the tunnel configured on one of the 1/10 GbE ports to be configured. The VE_Ports are numbered 16-23 on the Brocade 7800 and 12 - 31 on the Brocade FX8-24 blade. 580 Fabric OS Command Reference 53-1001337-01