HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 251

fabSwitchShow 2 fabSwitchShow Displays the fabric switch state structure information. Synopsis fabswitchshow Description Use this command to display the fabric switch state structure information. This command is strictly for debugging; it is not intended as a user command. Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands none Examples To display fabric switch state structure: switch:admin> fabswitchshow Fabric Switch State Structure Information State: D0 Stage: warm done Rdi Receive Timer: 0x10069400, IDLE STATE Unconfirmed Sw Timer: 0x10069508, IDLE STATE NTP Timer: 0x100695b8, IDLE STATE ME Timer: 0x10069610, IDLE STATE Principal Domain: 2 Upstream Port: 64 Principal Wwn: 10:00:00:60:69:80:06:ce Principal Priority: 0x2 Flags: 0x40 me retry count: 0 inq_sem count: 1 dbg_sem count: 1 ha efp count: 0 fab_q current count: 0 fab_q high water: 8 fab_q age: 0 (sec) dup xid occurrence: 0 iu nodes outstanding: 0 EFP update port: 2 FWN frames pending 0 test check point: No check point set fabric license: TRUE fabric EFP version: 7 last message: 20:30:29.826 *Snd inquiry (4) D0,NA D0,NA NA NA (output truncated) See Also supportShow Fabric OS Command Reference 221 53-1001337-01