HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 560

2 perfResourceShow perfResourceShow Synopsis Displays performance monitor resources for a logical switch. perfresourceshow --fportRes [[slot]/port] perfResourceShow --eeRes [[slot]/port] perfResourceShow --fabmodeRes perfResourceShow --installed [[slot]/port] perfResourceShow --help Description Use this command to determine the physical resources available to support the installation of performance monitors on a logical switch port. In a Virtual Fabric environment, performance monitors installed on a logical switch share the physical resources of the switches that make up the base fabric. To make efficient usage of existing system resources, such as link table size for all supported monitors, the resources reserved for a given logical switch are allocated when the first monitor is installed on a port belonging to that logical switch. The resources are de-allocated when the last monitor installed on a given partition is removed. This command displays the resource availability for the current logical switch context. The display includes the maximum of supported monitors, the number of monitors currently installed, and the remaining available resources. In a non-Virtual Fabric environment, this command displays the resources for the switch. Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands This command has the following optional operands: slot For bladed systems only, specifies the slot number of the port for which to display the resources, followed by a slash (/). port Specifies the number of the port for which to display the resources, relative to its slot for bladed systems. Use switchShow for a listing of valid ports. --fportRes Displays the number of F_Port monitors that can be installed on a specified port. If no port is specified, this command displays the resources for all ports on the current logical switch. --eeRes Displays the number of EE monitors that can be supported on the specified port. If no port is specified, this command displays the resources for all ports on the current logical switch. --fabmodeRes Displays whether fabric mode TopTalkers are running on the current logical switch. A port is not required with this operand. --installed Displays the monitor types installed on a specified port. --help Displays the command usage. 530 Fabric OS Command Reference 53-1001337-01