HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 910

2 timeOut timeOut Synopsis Sets or displays the idle timeout value for a login session. timeout [timeval] Description Use this command without an operand to display the current timeout value (in minutes) after which idle logins are automatically terminated. Use this command with the timeval operand to set the login timeout value to the specified interval. A value of 0 disables timeout of login sessions. The new timeout value takes effect with the next logins. Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands This command has the following operand: timeval Specify the number of minutes for the Telnet timeout value. Valid values are 1 to 99,999, or 0 to disable login timeouts. This operand is optional; if omitted, the command displays the current timeout value. Examples To set the idle timeout to 10 minutes: switch:admin> timeout 10 IDLE Timeout Changed to 10 minutes The modified IDLE Timeout will be in effect after NEXT login See Also none 880 Fabric OS Command Reference 53-1001337-01