HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 326

2 ficonShow ficonShow Synopsis Description Displays the contents of the specified FICON database. ficonshow database [fabric] where database is one of the following: ficonshow RNID [fabric] ficonshow LIRR [fabric] ficonshow SwitchRNID [fabric] ficonshow RLIR [fabric] ficonshow ILIR [fabric] Use this command to display the contents of a FICON database. The ficonShow database operand is the name of the database to display. If the fabric operand is absent, the command displays the members of the named database that are local to the switch on which the command was issued. If the fabric operand is present, it must be entered exactly as shown, and this specifies that all members are displayed, both local and remote. The following information might be displayed, depending on which database you enter and which operands you use with the command: Domain Displays the domain ID. Fabric WWN Displays the fabric WWN. Flag Indicates if the node is valid, not valid, or not current. Flag values are as follows: 0x00 Indicates the node ID of the storage port for RNID switch for SwitchRNID is valid. 0x10 Indicates the node ID of the channel port is valid. 0x20 Indicates the node ID of the storage port is not current. 0x30 Indicates the node ID of the channel port is not current. 0x40 Indicates the node ID of the storage port for the RNID switch for RLIR is not valid. 0x50 Indicates the node ID of the channel port is not valid. Fmt Displays the record-registration format. FRU Failure Description Indicates the FRU failure type as one of the following: WWN card [unit number] The WWN card. Power Supply [unit number] The Power Supply card. Hardware Slot [unit number] The Hardware Slot. 296 Fabric OS Command Reference 53-1001337-01