HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 44

2 ad number -d "dev_list" D,PI Device WWN -s "switch_list" Switch WWN Domain ID "command_list" new_ad_id -i An Admin Domain can be specified by a number. Valid values include 0 through 255. AD0 and AD255 are always active. AD0 cannot be specified with --activate, --deactivate or --delete actions. AD255 can be specified only with --exec, --show and --validate actions. For all command iterations, with the exception of ad --create, the Admin Domain is specified either by a name or a number. For ad --create, both name and number can be specified: for example, ad --create test_ad/10 -d "100,5; 100,1". Specifies the list of devices in an Admin Domain, in quotation marks. Separate each entry in the device list with a semicolon (;). Valid formats include: Uses existing zone D,PI member types. Benefits include: • Grants port control and zoning on the switch port and the devices attached to that port. • PI can be specified as a range; for example, D,[0-34]. The port index range is expanded and stored internally. • The same D,PI members can be specified in more than one Admin Domain. Uses traditional zone WWN member types. Benefits include: • Supports node or port WWNs. • End-device members, whose WWNs are used in an Admin Domain definition, need not be online when the Admin Domain is created (similar to a zoneCreate operation). • Provides rights to zone the devices. • Provides administrative view rights to the switch port the device is connected to. Specifies the list of switches in an Admin Domain. The list must be enclosed in quotation marks. Separate each entry in the switch list with a semicolon (;). Specify the switch in one of the following formats: World wide name of the switch. Any switch member specified in Domain ID format is converted into a switch WWN-based on the current fabric information. Operations with switch list fail if the domain ID to switch WWN lookup fails. Membership in an AD switch_list grants switch administrative operations such as switchDisable, switchEnable, reboot, ad, etc. on the switch. Ownership of a switch implicitly provides port control capability on all its ports, but no zoning control. Specifies one or more commands to execute in an Admin Domain context. This operand is valid only with the --exec option. Specifies a new Admin Domain name or number. This operand is valid only with the --rename option. Format is the same as ad_id. Displays the implicit members of AD0. This operand is valid only with the --show option. 14 Fabric OS Command Reference 53-1001337-01