HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 573

perfCfgSave 2 perfCfgSave Saves performance monitoring configuration settings to nonvolatile memory. Synopsis perfcfgsave Description Use this command to save the current Performance Monitor configuration for end-to-end (EE) and filter configuration settings of performance monitoring into nonvolatile memory. Configurations are saved persistently across power cycles. The number of monitors that can be saved to flash memory is limited as follows: • 16 EE monitors • 16 filter monitors • A total number of 512 monitors per switch When there are more than 512 monitors in the system, monitors are saved to the flash in the following order: 1. For each port (from 0 to MAX_PORT), the EE monitors in each port are saved to the flash first. 2. Filter monitors for each port are saved next. When the total monitors per port or switch exceeds the limit, the following message is displayed: "Performance monitor count has exceeded limit. some monitors have been discarded." Notes This command requires an Advanced Performance Monitoring license. This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE ports. Monitors created by Web Tools are not saved in persistent memory. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands none Examples To save the current performance monitoring configuration to firmware: switch:admin> perfcfgsave This will overwrite previously saved Performance Monitoring settings in FLASH. Do you want to continue? (yes, y, no, n): [no] y Please wait ... Performance monitoring configuration saved in FLASH. See Also perfCfgClear, perfCfgRestore Fabric OS Command Reference 543 53-1001337-01