HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 126

2 chassisEnable chassisEnable Enables all user ports in a chassis. Synopsis chassisenable Description Use this command to enable a Virtual Fabric-aware chassis. All Fibre Channel ports that passed the power-on self test (POST) are enabled. They may come online if connected to a device, or remain offline if disconnected. Use chassisEnable to re-enable the chassis after making configuration changes or running offline diagnostics. If the chassis is partitioned into multiple logical switches and physically connected to multiple logical fabrics, the logical switches rejoin their fabrics. As each port is enabled, the front panel LED changes from slow flashing amber to green for online ports, or to yellow for ports that do not initialize. Disconnected ports remain unlit. Loopback ports are slow flashing green when online. Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands none Examples To enable a chassis: switch:admin> chassisenable See Also bladeDisable, bladeEnable, chassisDisable, switchShow, switchDisable, switchEnable, switchCfgPersistentEnable, switchCfgPersistentDisable 96 Fabric OS Command Reference 53-1001337-01