HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 123

chassisConfig 2 chassisConfig Synopsis Displays or sets the configuration of the Brocade 48000. chassisconfig [-f][option] Description This command is retained for legacy reasons only. It has nothing to do with Virtual Fabrics and chassis configuration related to the Virtual Fabric feature. The chassisConfig command is supported ONLY on the Brocade 48000 and ONLY option 5 is supported. When no arguments are provided, this command displays the current configuration of the chassis as well as the supported configuration, which is 5. When a specific option is provided to this command, all CPs currently in the system are immediately rebooted and come up in the specified mode. This may result in some blades being faulted as incompatible, based on the new configuration option. When an option is not supported by the platform, this command is rejected without causing a reboot. 5 One 384-port switch (Blade ID 17, 18, 24, 31, 33, 36, 39 in slots 1-4, 7-10, Blade ID 16 in slots 5-6). Certain configuration values that are not considered switch-based and are determined not to cause adverse effects are left untouched. These include SSL certificates, PKI certificates, licenses, and IP address. When the -f (force) option is omitted, this command prompts for your consent to proceed further with the configuration change. It also prompts you to upload the configuration data to a host so it can be used as a guide to re-establishing the configuration data in the new mode. Use the -f option to proceed without the interactive step. Notes Chassis configuration changes are disruptive and should be implemented with caution. User account data and passwords might not be saved with configUpload. User accounts created with the userConfig command are deleted and user accounts are reset to factory defaults. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands This command has the following operands: -f If specified, forces configuration changes without prompting for confirmation or requesting a configuration upload. option Specify the configuration option to apply to the chassis. The only supported option is 5. Examples To display the current configuration option on a Brocade 48000 director: switch:admin> chassisconfig Current Option: 5 All Supported Options Option 5: One 384-port switch Blade ID's 17, 18, 24, 31, 33, 36, 39, 37, 51, 55 in slots 1-4, 7-10 Blade ID 16 in slots 5-6 See Also configDownload, configUpload, slotShow Fabric OS Command Reference 93 53-1001337-01