HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 533

nsCamShow 2 nsCamShow Displays information about remote devices in the Name Server (NS) cache. Synopsis nscamshow [-t] Description Use this command to display the local NS cache information about the devices discovered in the fabric by the NS cache manager. If the NS cache manager does not discover new switches or new devices in the fabric, the command displays the message "No Entry is found!" For each remote switch found, this command displays the domain number, state, revision, owner, and a list of devices for that domain number. For each device found in the devices list, the following information is displayed: Type U for unknown, N for N_Port, NL for NL_Port. Pid The 24-bit Fibre Channel address. COS A list of classes of service supported by the device. PortName The device's port world wide name (WWN). NodeName The device's node WWN. Permanent Port Name Physical N_Port or NL_Port WWN. There might be additional lines if the device has registered FC4s, fabric port name, or port and node symbolic name. Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. Operands The operand is as follows: -t Specify to display the device type. Of the two device type parts, the first part indicates the origination of the device. Currently, four originations are defined: • Physical - Device connected to the NX_Port, using FLOGI to log into the switch. • Virtual - Contrived device by the switch. • NPV - Device connected to the NX_Port, using FDISC to log in to the switch. • iSCSI - Device connected to the iSCSI port. The second part indicates the role of the device. Currently, four roles are defined: • Unknown (initiator/target) - Device role not detected. • Initiator - An iSCSI initiator. • Target - An iSCSI target. • Initiator+Target - Both an iSCSI initiator and an iSCSI target. Fabric OS Command Reference 503 53-1001337-01