HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 193

cryptoCfg 2 -encrypt | -cleartext Enables encryption or cleartext (no encryption). By default, cleartext is enabled. -key_lifespan time_in_days | none Specifies the lifespan of the encryption key in days. The key expires after the specified number of days. The default value is none, which means the key does not expire until the value is set. This parameter cannot be modified for tape pools once it is set. --delete -tapepool Deletes the specified tape pool. This command is valid only on the group leader. The following operand is required: -label pool_label | -num pool_num Specifies the tape pool by volume label or tape pool ID. Use --show -tapepool for a listing of configured tape pools and their respective labels or IDs. --modify -tapepool Modifies the encryption policies of a specified tape pool. This command is valid only on the group leader. The following operand is required: -label pool_label | -num pool_num Specifies the tape pool by volume label or tape pool ID. Use --show -tapepool for a listing of configured tape pools and their respective labels or IDs. To modify the label or pool number, you must delete and recreate the tape pool. You may optionally modify the following tape policy parameters. Refer to cryptocfg --create -tapepool for descriptions of these parameters. Exercise caution when modifying tape pool policy parameters while tape sessions are in progress. Refer to the Fabric OS Administrator's Guide for more information. [-encryption_format native | DF_compatible] [-encrypt | -cleartext] --manual_rekey Performs a manual re-keying of a specified LUN associated with a specified CTC. Manual re-keying is performed in both online and offline fashion depending on whether or not the host is online or host I/O is present. If any policy-based re-keying operation is currently in progress, this command aborts with a warning message. This command is valid only on the group leader. The following operands are supported: crypto_target_container_name Specifies the name of the CTC to which this LUN belongs. LUN_Num Specifies the number of the LUN to be re-keyed. Use --show -container for a list of LUN numbers associated with the specified CTC. initiator_PWWN Specifies the port WWN of the initiator for the specified LUN. --manual_rekey -all Performs a manual re-keying of all encrypted disk LUNs in the encryption group. This operation may take an extended period of time. Fabric OS Command Reference 163 53-1001337-01