HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 564

2 perfAddIPMonitor perfAddIPMonitor Synopsis Adds a filter-based performance monitor for IP frame count. perfaddipmonitor [slotnumber/]portnumber [alias] Description Use this command to create a filter-based monitor that will count the number of IP traffic frames. Only frames transmitted are counted. Execution of this command displays a numeric key that uniquely identifies the monitor. Use the perfMonitorShow command for a listing of valid keys and user-defined aliases. Notes This command requires an Advanced Performance Monitoring license. This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE ports. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands This command has the following operands: slotnumber For bladed systems only, this operand specifies the slot number of the port on which the monitor is to be added, followed by a slash (/). portnumber Specifies the number of the port on which the monitor is to be added, relative to its slot for bladed systems. Use switchShow for a list of valid ports. alias Specifies a name for this monitor. Names exceeding 10 characters are truncated. To include spaces, the string must be surrounded by double quotation marks. Spaces count toward the character limit but are removed. This operand is optional. The default alias is "IP Frame". Examples To add an IP monitor to a port: switch:admin> perfaddipmonitor 1/4 IP_MONITOR IP traffic frame monitor #0 added See Also perfAddEEMonitor, perfAddReadMonitor, perfAddRWMonitor, perfAddSCSIMonitor, perfAddUserMonitor, perfAddWriteMonitor 534 Fabric OS Command Reference 53-1001337-01