HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 152

2 configure The configure command runs in interactive mode and presents you with a series of hierarchical menus. Each top-level menu and its associated submenus consist of a text prompt, a selection of valid values, and a default value (in brackets). The following keys control the execution of the command: Return When entered at a prompt with no preceding input, the command accepts the default value (if applicable) and moves to the next prompt. Interrupt (Ctrl-C) Aborts the command immediately and ignores all changes made. End-of-file (Ctrl-D) When entered at a prompt with no preceding input, terminates the command and saves changes made. The following parameters can be modified with the configure command: Switch Fabric Settings Fabric settings control the overall behavior and operation of the fabric. Some of these settings, such as the domain, are assigned automatically and may differ from one switch to another in a given fabric. Other parameters, such as buffer-to-buffer credit or timeout values, can be modified to suit specific applications or operating environments but must be in agreement among all switches to allow formation of the fabric. Table 2 lists the switch fabric settings that can be modified. TABLE 2 Configure command fabric parameters (* = multiplication symbol) Field Type Default Range Domain Allow XISL Use Enable a 256 Area Limit R_A_TOV E_D_TOV WAN_TOV MAX_HOPS Data Field Size Sequence Level Switching Disable Device Probing Suppress Class F Traffic Per-frame Route Priority Long Distance Fabric BB Credit Disable FID Check Insistent Domain ID Mode number boolean number number number number number number boolean boolean boolean boolean boolean number boolean boolean 1 yes 0 10000 2000 0 7 2112 0 0 0 0 0 16 yes no varies yes or no 0 to 2 E_D_TOV * 2 to 120000 1000 to R_A_TOV / 2 0 to R_A_TOV / 4 7 to 19 256 to 2112 0 or 1 0 or 1 0 or 1 0 or 1 0 or 1 1 to 27 yes or no yes or no Fabric setting fields are defined as follows: Domain The domain number uniquely identifies a switch in a fabric. This value is automatically assigned by the fabric. The range of valid values varies depending on the switch model and other system parameter settings. 122 Fabric OS Command Reference 53-1001337-01