HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 71

aliAdd 2 aliAdd Synopsis Adds a member to a zone alias. aliadd "aliName", "member[; member...]" Description Use this command to add one or more members to an existing zone alias. The alias member list cannot contain another zone alias. This command changes the defined configuration. For the change to become effective, enable the zone configuration with the cfgEnable command. For the change to be preserved across switch reboots, save the zone configuration to nonvolatile memory with cfgSave. Notes The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. When an FCS policy is enabled, this command can be issued only from the primary FCS switch. Operands The following operands are required: "aliName" Specify the name of a zone alias, enclosed in double quotation marks. "member" Specify a member or list of members to be added to the alias, enclosed in double quotation marks. Members must be separated by semicolons. An alias member can be specified by one or more of the following methods: • A switch domain and port index pair. Use switchShow for a list of valid port index numbers. • A world wide name (WWN). Examples To add members to zone aliases array1, array2, and loop1: switch:admin> aliadd "array1", "1,2" switch:admin> aliadd "array2", "21:00:00:20:37:0c:72:51" See Also aliDelete, aliRemove, aliShow Fabric OS Command Reference 41 53-1001337-01