HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 459

iscsiChipTest 2 iscsiChipTest Synopsis Performs functional test of components in iSCSI complex. iscsichiptest --slot slotnumber -testtype type -unit GigEports Description Use this command to verify the memory of the network processor and iFlipper FPGA. Notes This command is supported only on the Brocade FR4-16IP blade. On all other platforms, this command displays the message: "Command not applicable to this platform. SKIPPED!" The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands This command has the following operands: --slot slotnumber Specifies the slot number for which to run the diagnostics. The default is set to 0 and designed to operate on fixed-port-count products. -testtype type Selects the test type to run. By default, the command runs all tests. Valid values are: 0 All of the following tests. 1 BCM 1125H SRAM test. -unit GigEports 2 iFlipper internal register test. Specifies the GbE port to test. By default, all GbE ports in the specified slot are tested. Specify a value in the range of 0 - 7 or specify 8 for all ports. Examples To run iscsichiptest: switch:admin> iscsichiptest --slot 7 -unit 1 -testtype 0 Running iscsichiptest Test Complete: iscsichiptest Pass 1 of 1 Duration 0 hr, 3 min & 12 sec (0:3:12:511). passed. See Also iscsiPathTest Fabric OS Command Reference 429 53-1001337-01