HP StorageWorks 1606 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 578

2 perfMonitorClear perfMonitorClear Synopsis Clears counters of end-to-end, filter-based, and ISL performance monitors on a port. perfmonitorclear --class monitor_class [slotnumber/]portnumber [monitorId] Description Use this command to clear counters for performance monitors on a port, specified by class. Monitor classes include end-to-end monitors (EE), filter-based monitors (FLT), and interswitch link monitors (ISL). Issuing the portStatsClear command on a port clears all end-to-end and filter-based monitors (but not ISL monitors) for all the ports in the same quad. Notes This command requires an Advanced Performance Monitoring license. This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE ports. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands This operands are as follows: --class monitor_class slotnumber portnumber monitorId Specifies the monitor class as one of the following: EE (end-to-end), FLT (filter-based), or ISL (interswitch link). These values are case-sensitive. This operand is required. For bladed systems only, specifies the slot number of the port on which the monitor counter is to be cleared, followed by a slash (/). Specifies the number of the port on which the monitor counter is to be cleared, relative to its slot for bladed systems. Use switchShow for a list of valid ports. Specifies the numeric key of the monitor to be deleted. The key is defined when a monitor is created and can be displayed with the perfMonitorShow command. This operand is optional. If no operand is specified, this command clears all monitor counters of the specified monitor_class on the port. This operand does not apply to ISL monitors. Examples To clear statistics counters for an end-to-end monitor: switch:admin> perfmonitorclear --class EE 1/2 5 End-to-End monitor number 5 counters are cleared switch:admin> perfmonitorclear --class EE 1/2 This will clear ALL EE monitors' counters on port 2, continue? (yes, y, no, n): [no] y To clear statistics counters for a filter-based monitor: switch:admin> perfmonitorclear --class FLT 1/2 4 Filter-based monitor number 4 counters are cleared 548 Fabric OS Command Reference 53-1001337-01